You are looking at the documentation of a prior release. To read the documentation of the latest release, please visit here.

Sending Backup Notification to Slack Channel

In this guide, we are going to show you how to send backup notifications to a Slack channel. Here, we are going to use Slack Incoming Webook to send the notification.

Before You Begin

At first, you need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. If you do not already have a cluster, you can create one by using kind.
Install Stash Enterprise in your cluster following the steps here.
If you haven’t read about how hooks work in Stash, please check it from here.

You should be familiar with the following Stash concepts:

To keep everything isolated, we are going to use a separate namespace called demo throughout this tutorial.

$ kubectl create ns demo
namespace/demo created

Configure Slack Incoming Webhook

At first, let’s configure a Slack incoming webhook. We are going to send the notifications to a channel named notification-test. Now, follow the steps below:

Go to https://api.slack.com/ and click the Create an app button as highlighted in the red rectangle in the following image.

We are going to build a new app. So, select the From scratch option as below.

Now, give your app a name and select your workspace.

Then, select your application type as Incoming Webhooks.

Now, activate your incoming webhook.

Scroll down and click on the Add New Webhook to Workspace button.

Now, select your desired Slack channel where you want to send the notifications. Then, click on the Allow button.

Finally, copy the webhook path starting from /service/****. We will use this path in our hook specification.

Our Slack incoming webhook is ready to receive notifications. In the next section, we are going to configure a Stash webhook to send backup notifications to this incoming webhook.

Prepare Application

Now, let’s deploy a sample application and generate some sample data for it. Here, is the YAML of a Deployment along with its PVC that we are going to deploy:

kind: PersistentVolumeClaim
apiVersion: v1
metadata:
  name: stash-sample-data
  namespace: demo
spec:
  accessModes:
  - ReadWriteOnce
  resources:
    requests:
      storage: 1Gi
---
apiVersion: apps/v1
kind: Deployment
metadata:
  labels:
    app: stash-demo
  name: stash-demo
  namespace: demo
spec:
  replicas: 1
  selector:
    matchLabels:
      app: stash-demo
  template:
    metadata:
      labels:
        app: stash-demo
      name: busybox
    spec:
      containers:
      - args: ["sleep 3000"]
        command: ["/bin/sh", "-c"]
        image: busybox
        imagePullPolicy: IfNotPresent
        name: busybox
        volumeMounts:
        - mountPath: /source/data
          name: source-data
      restartPolicy: Always
      volumes:
      - name: source-data
        persistentVolumeClaim:
          claimName: stash-sample-data

Let’s deploy the above deployment.

❯ kubectl apply -f https://github.com/stashed/docs/raw/v2022.05.12/docs/guides/hooks/slack-notification/examples/deployment.yaml
persistentvolumeclaim/stash-sample-data created
deployment.apps/stash-demo created

Once the deployment is running, lets exec into its pod and create some sample file in /source/data directory.

❯ kubectl exec -n demo stash-demo-669d77dfc4-nhdgg -- touch /source/data/file-1.txt
❯ kubectl exec -n demo stash-demo-669d77dfc4-nhdgg -- touch /source/data/file-2.txt
❯ kubectl exec -n demo stash-demo-669d77dfc4-nhdgg -- touch /source/data/file-3.txt

Let’s verify that the files have been created successfully:

❯ kubectl exec -n demo stash-demo-669d77dfc4-nhdgg -- ls /source/data
file-1.txt
file-2.txt
file-3.txt

Our application is ready with some sample data. In the next section, we are going to setup a backup for this application.

Prepare Backend

We are going to store our backed-up data into a GCS bucket. At first, we need to create a secret with GCS credentials then we need to create a Repository CR. If you want to use a different backend, please read the respective backend configuration doc from here.

Create Storage Secret:

Let’s create a secret called gcs-secret with access credentials to our desired GCS bucket,

$ echo -n 'changeit' > RESTIC_PASSWORD
$ echo -n '<your-project-id>' > GOOGLE_PROJECT_ID
$ cat /path/to/downloaded-sa-key.json > GOOGLE_SERVICE_ACCOUNT_JSON_KEY
$ kubectl create secret generic -n demo gcs-secret \
    --from-file=./RESTIC_PASSWORD \
    --from-file=./GOOGLE_PROJECT_ID \
    --from-file=./GOOGLE_SERVICE_ACCOUNT_JSON_KEY
secret/gcs-secret created

Create Repository:

Now, create a Repository using this secret. Below is the YAML of Repository CR we are going to create,

apiVersion: stash.appscode.com/v1alpha1
kind: Repository
metadata:
  name: gcs-repo
  namespace: demo
spec:
  backend:
    gcs:
      bucket: stash-testing
      prefix: /webinar/slack-notification
    storageSecretName: gcs-secret

Let’s create the Repository we have shown above,

$ kubectl apply -f https://github.com/stashed/docs/raw/v2022.05.12/docs/guides/hooks/slack-notification/examples/repository.yaml
repository.stash.appscode.com/gcs-repo created

Now, we are ready to backup our application into our desired backend.

Backup

In this section, we are going to setup a backup for the application we deployed earlier. We are going to configure a postBackup hook to send a notification to our Slack incoming webhook when a backup session completes.

Here, is the YAML of the BackupConfiguration that we are going to create:

apiVersion: stash.appscode.com/v1beta1
kind: BackupConfiguration
metadata:
  name: deployment-backup
  namespace: demo
spec:
  repository:
    name: gcs-repo
  schedule: "*/5 * * * *"
  target:
    ref:
      apiVersion: apps/v1
      kind: Deployment
      name: stash-demo
    volumeMounts:
    - name: source-data
      mountPath: /source/data
    paths:
    - /source/data
  hooks:
    postBackup:
      httpPost:
        host: hooks.slack.com
        path: /services/XXXX/XXXXX/XXXXX
        port: 443
        scheme: HTTPS
        httpHeaders:
          - name: Content-Type
            value: application/json
        body: |
          {
            "blocks": [
                {
                  "type": "section",
                  "text": {
                      "type": "mrkdwn",
                      "text": "
                          {{if eq .Status.Phase `Succeeded`}}
                              :white_check_mark: Backup succeeded for {{ .Namespace }}/{{.Target.Name}}
                          {{else}}
                              :x: Backup failed for {{ .Namespace }}/{{.Target.Name}} Reason: {{.Status.Error}}.
                          {{end}}"
                    }
                }
              ]
          }          
  retentionPolicy:
    name: 'keep-last-5'
    keepLast: 5
    prune: true

Notice the hooks section. We have setup a postBackup hook which sends an HTTP POST request. In the path field of the httpPost section, we have specified the Slack incoming webhook path that we copied in the last step of configuring Slack incoming webhook.

Also, notice the body field of the httpPost section. We have used Go template to conditionally send different messages based on the backup phase. If the backup fails, we have sent the respective error message in the notification body.

Let’s create the BackupConfiguration we have shown above,

❯ kubectl apply -f https://github.com/stashed/docs/raw/v2022.05.12/docs/guides/hooks/slack-notification/examples/backupconfiguration.yaml
backupconfiguration.stash.appscode.com/deployment-backup created

Wait for BackupSession:

Now, let’s wait for a BackupSession. Run the following command to watch for BackupSession.

❯ kubectl get backupsession --all-namespaces -w
NAMESPACE   NAME                           INVOKER-TYPE          INVOKER-NAME        PHASE   DURATION   AGE
demo        deployment-backup-1650277200   BackupConfiguration   deployment-backup                      0s
demo        deployment-backup-1650277200   BackupConfiguration   deployment-backup   Pending              0s
demo        deployment-backup-1650277200   BackupConfiguration   deployment-backup   Running              0s
demo        deployment-backup-1650277200   BackupConfiguration   deployment-backup   Succeeded   31s      30s

We can see from the above output that the backup session has succeeded. Now, we are going to verify whether the notification was sent properly or not.

Verify Notification:

Now, if we go to the Slack channel we have configured for notification. We should see a notification similar to this:

Backup Failure Notification

Now, let’s force the backup process to fail so that we can verify the backup failure notification contains the failure reason too.

We are going to provide an invalid path in the paths field of the target section. This will force the backup to fail. Here, is the YAML of the updated BackupConfiguration:

apiVersion: stash.appscode.com/v1beta1
kind: BackupConfiguration
metadata:
  name: deployment-backup
  namespace: demo
spec:
  repository:
    name: gcs-repo
  schedule: "*/5 * * * *"
  target:
    ref:
      apiVersion: apps/v1
      kind: Deployment
      name: stash-demo
    volumeMounts:
    - name: source-data
      mountPath: /source/data
    paths:
    - /path/does/not/exist
  hooks:
    postBackup:
      httpPost:
        host: hooks.slack.com
        path: /services/XX/XXX/XXXX
        port: 443
        scheme: HTTPS
        httpHeaders:
          - name: Content-Type
            value: application/json
        body: |
          {
            "blocks": [
                {
                  "type": "section",
                  "text": {
                      "type": "mrkdwn",
                      "text": "
                          {{if eq .Status.Phase `Succeeded`}}
                              :white_check_mark: Backup succeeded for {{ .Namespace }}/{{.Target.Name}}
                          {{else}}
                              :x: Backup failed for {{ .Namespace }}/{{.Target.Name}} Reason: {{.Status.Error}}.
                          {{end}}"
                    }
                }
              ]
          }          
  retentionPolicy:
    name: 'keep-last-5'
    keepLast: 5
    prune: true

Let’s apply the above BackupConfiguration:

❯ kubectl apply -f https://github.com/stashed/docs/raw/v2022.05.12/docs/guides/hooks/slack-notification/examples/backupconfiguration.yaml
backupconfiguration.stash.appscode.com/deployment-backup configured

Wait for BackupSession:

Again, let’s wait for a scheduled backup. Run the following command to watch for a BackupSession:

❯ kubectl get backupsession --all-namespaces -w
NAMESPACE   NAME                           INVOKER-TYPE          INVOKER-NAME        PHASE   DURATION   AGE
demo        deployment-backup-1650277554   BackupConfiguration   deployment-backup                      0s
demo        deployment-backup-1650277554   BackupConfiguration   deployment-backup   Pending              0s
demo        deployment-backup-1650277554   BackupConfiguration   deployment-backup   Running              5s
demo        deployment-backup-1650277554   BackupConfiguration   deployment-backup   Failed    6s         5s

As we can see that the backup has failed this time. Let’s verify the failure notification.

Verify Notification:

If we go to the Slack channel, we should see a new notification has been sent. This time it indicates a failure and also contains the failure reason.

Cleanup

To clean up the test resources we have created throughout this tutorial, run the following commands:

# Delete BackupConfiguration
kubectl delete backupconfiguration -n demo deployment-backup
# Delete Repository
kubectl delete repository -n demo gcs-repo
# Delete storage Secret
kubectl delete secret -n demo gcs-secret

# Delete Deployment and it's PVC
kubectl delete deployment -n demo stash-demo
kubectl delete pvc -n demo stash-sample-data

KubeDB

Stash

KubeVault

Voyager

ConfigSyncer

Guard

RESOURCES

Elasticsearch

MariaDB

MongoDB

MySQL

Percona XtraDB

PostgreSQL

Etcd

NATS

Redis

KubeDump